3 / 4 Axis CNC Router Controller Kit 3N.m 100KHz USB Mach3

  • $439.90
    Precio unitario por 


Package list:

Item Name 3 Axis 4 Axis
4 Axis Mach3 USB Breakout Board 1 1
Remote Controller 1 1
USB Cable 1 1
Closed-Loop Stepper Driver 3 4
3N.m Closed-Loop Stepper Motor with 3 Meters Cable 3 4
360W 36V Power Supply 1 1
75W 24V Power Supply 1 1
Touch Probe 1 1
Proximity switch 3 4
E-stop Button 1 1
2-Channel 24V Relay 1 1
CD disk (Instructions, Mach3 software and etc.,) 1 1



Description:
This is a CNC stepper motor driver kit, which could work with Mach3 software. You could use this CNC kit to build a CNC router, laser router and so on. If you want to build 3 axis machine, you could choose 3 axis CNC kit; if you want to build 4 axis machine, you could choose 4 axis CNC kit.

Application Areas:
Suitable for all kinds of small and medium-sized automation equipment and equipment, such as: engraving machine, stripping machine, marking machine, cutting machine, laser machine, medical equipment, CNC machine tools, automatic assembly equipment, electronic processing equipment. In the user expectations of low noise, high speed equipment in the application of special results

Description:
Support for 3 axis or 4 axis linkage, you can connect four stepper motor drives or servo drives;
Maximum step-pulse frequency is 100 KHz, which is suitable for the servo or stepping motor;
Support automatic probe tool
Support Emergency input
Support for limit switch (or 3-wires PNP Proximity switch)
Support for connecting electronic handwheel
Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;
1 status LED, indicate connection status on the board.