XC809M 1~6 Axis USB CNC Control System Motion Controller FANUC G-code Support Offline Milling Boring Tapping Drilling Feeding

  • $469.90
    Prezzo unitario per 

Package Included:
1 x CNC Control System XC809M
1 x Expansion Panel (5 x 22mm holes, 1 x 22mm/44mm hole)
2 x Parallel Female Connectors
2 x Parallel Male Connectors
1 x English Manual (We will send by Email)
XC809M drilling and attacking multi-function CNC system is a new generation CNC system developed by our company. Supports boring, tapping, drilling and automatic feeding. It adopts 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, fully linked, 0.001mm interpolation precision, and the highest speed is 30m/min. It is the best choice for CNC drilling machines, special machine tools, automation equipment, feeding robots, etc.

Comparison of XC709D, XC709M, XC809D, XC809M:






Application Field

Used in engraving machines, engraving and milling machines, small machining centers

Used for drilling, tapping, and automated drilling machines.


Micro line segments Look-ahead Algorithm

General algorithm


Processing standard Workpiece

Processing non-standard Workpiece

Manual Programming


Don’t support

Program exported from Computer



  • Based on 32-bit microprocessor, fully linked, 0.001mm interpolation accuracy, maximum speed of 30 m / min, support direction + pulse and quadrature pulse.
  • 7-inch color widescreen LCD, resolution 800X480, Windows interface style. Equipped with 8 soft function keys, the operation is simple and easy to learn. Provide rich display interface such as parameter classification, alarm log, system diagnosis, etc., convenient for debugging and maintenance.
  • It can run 3 programs (1 main program and 2 sub-programs) at the same time, which is convenient for writing programs for processing, loading and blanking.
  • International standard G directive, compatible with FANUC system directives.
  • 40 kinds of G-command support drilling cycle and tapping cycle.
  • Part program full-screen editing, built-in 512M massive program space, can store N parts program.
  • USB interface, support U disk file reading and writing, data backup.
  • Input 24 points (expandable to 96), output 24 points (expandable to 96) (custom), flexible and convenient.
  • Chinese/English operation interface, switchable, complete help information, and more convenient operation.
  • System uses pre-interpolation acceleration and deceleration control.
  • Support multi-level operation authority, convenient device management, and limited time system locking function.
  • Support GG, Mastercam, PowerMill, FeatureCAM, ArtCAM, JDPaint, Wentai and other third-party software G code files.
  • Supports self-programming of the tool magazine and flexible use of multiple tool magazines.
Technical Specifications:

Basic Functions

Number of control axis

 1~6 axis (X, Y, Z, A, B, C)

Number of linkage axis

 full linkage

Tool magazine

 Support, need to edit the magazine code


 2 analog spindles, where the spindle 1 can use a digital spindle (occupying a digital axis)

Spindle monitoring


Minimum command unit

 0.001 mm

Maximum command value

 ±99999999 × minimum command unit

Rapid feed rate

 30000 mm / min

Rapid feedrate override

 F0, 25%, 50%, 75%, 100%

Pulse mode

1: direction + pulse 2: quadrature pulse (if the driver supports, recommended, anti-interference is stronger)

Maximum frequency

 100 KHz, 200 KHz, 500 KHz can be set. (500 KHz can only be realized in all axes orthogonal output mode)

Feed rate override


Electronic gear ratio

 1 ~ 65535: 1 ~ 65535

Automatic acceleration and deceleration



 G00 (linear interpolation positioning)


 straight line (G01), arc (G02/G03/G12), helical interpolation

Return to reference point

 Automatically return to reference point (G28)


 7-inch TFT LCD screen with resolution of 800×480

MDI software key


Single step to

 x1, x10, x100

Communication interface

 U disk interface

External hand wheel interface


I/O interface

 24/24 (expandable to 96/96)

Pause (seconds)


Quasi-stop state




Storage trip check


MDI operation

 Yes, support multi-segment operation



Jump switch


Single-segment operation


Program protection switch


Self-diagnostic function


Emergency stop



Single Phase Input 100~240V AC 1.52A 50/60 Hz±1, Output 24V DC 3.2A

Coordinate system

 Machine coordinate system (G53), workpiece coordinate system (G92, G54~G59), local coordinate system (G52), coordinate system plane designation

Automatic coordinate system setting


Decimal point input


Auxiliary Function

Auxiliary function

 M2 digits, M code customization, manual / MDI / automatic mode control spindle forward rotation, reverse rotation, stop; control coolant start and stop; control lubrication start and stop, etc.

Spindle Function

Spindle function

 double spindles

Digital spindle

 Supported by spindle 1, occupies one digital axis (Z axis does not support), and the rotation speed is more stable.



Spindle analog output

 Yes, dual spindles

Knife Function

Tool function

 Support automatic tool change, support split centering knife, 3-point centering tool

Tool compensation memory

 -9999.999~9999.999, 99

Tool compensation

 Length compensation for each axis

Editing Operation

Editing functions

 parameters, diagnostic bitwise input, program editing, MDI multi-block execution

Storage capacity


Number of stored programs

 N one

Display of program name

 Chinese, English, numbers, combination

Program line lookup


Skip the optional block


Program switch




 Chinese, English, Switchable

Processing time, number of parts display


Spindle speed, M/S command


Dimensions (mm)

 Dimensions (height × width × thickness) 390×253×80

Opening size (height x width)