USB Mach3 CNC Router 3/4 Axis 2Nm Stepper Motor Driver Kit with 360W 36V 10A Power Supply 100KHz 110V 220V

  • $249.90
    单价 单价 


I. What is in the package?

3 Axis:

  • 1 x ARGEDO 4 Axis Mach3 USB Breakout Board with a USB Cable
  • 1 x Jog Handler Controller with Cable
  • 3 x ARGEDO Single Axis TB6600 Stepper Driver
  • 3 x ARGEDO Nema23 Stepper Motor
  • 1 x ARGEDO 36V/10A Switching Power Supply
  • Instructions and Mach3 Software with License (We will send these to you by email)

 

4 Axis:

  • 1 x ARGEDO 4 Axis Mach3 USB Breakout Board with a USB Cable
  • 1 x Jog Handler Controller
  • 4 x UCONTRO Single Axis TB6600 Stepper Driver
  • 4 x UCONTRO Nema23 Stepper Motor
  • 1 x UCONTRO 36V/10A Switching Power Supply
  • Instructions and Mach3 Software with License (We will send these to you by email)

 

II. Description:

This is a CNC stepper motor driver kit, which could work with Mach3 software. You could use this CNC kit to build a CNC router, laser router and so on. If you want to build 3 axis machine, you could choose 3 axis CNC kit; if you want to build 4 axis machine, you could choose 4 axis CNC kit.

 

Part 1: Mach3 USB Breakout Board with Jog Handler

Feature:

  • Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
  • Maximum step-pulse frequency is 100 KHz, which is suitable for the servo or stepping motor;
  • Support automatic probe tool
  • Support Emergency input
  • Support for limit switch
  • Support for connecting electronic handwheel
  • Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
  • Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
  • 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
  • 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;
  • 1 status LED, indicate connection status on the board.

 

Part 2: Single Axis Stepper Drivers

Overview:

This is a high performance micro-stepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (50V) process technology on the chipset also ensures maximum 5.0A output current and 50V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver.

 

Features:

1) Average current control, two-phase sinusoidal current drive output;

2) DC 12 ~ 48V power supply, the internal integration of 12V and 5V regulator;

3) Optically isolated signal input / output;

4) Overvoltage, undervoltage, overcurrent, and white short-circuit protection;

5) 4 file segmentation and automatic half-streaming capabilities up to 16 segments;

6) File output phase current settings;

7) High starting speed;

8) High-speed torque;
 

Part 3: NEMA 23 Stepper Motors

Feature:

  • Model: 57U1876-447
  • Nema 23 stepper motor
  • 2 phase hybrid type
  • Step Angle: 1.8°
  • Holding torque: 2Nm
  • Phase Current: 4.7A
  • Phase Resistance: 1.25 ohms
  • Phase Inductance: 4.0 MH
  • Detent Torque: 200 gcm
  • Rotor Inertia: 82 g-cm⊃2;
  • Insulation Class: B
  • Lead Wire Numbers: 4
  • Weight: 0.34kg
  • Length: 48mm
  • Shaft: 5mm
  • Low noise
  • Operate smoothly
  • High Torque
  • Good accelerate function

Part 4: 36V 10A Power Supply

Features:

  • Input Voltage:  AC110V/220V, Switchable
  • Output Voltage: DC 36V
  • Output Current: 0~10A
  • Net Weight:  800gram
  • Dimension: 220*115*50mm
  • Shell Material: Metal case / Aluminum case
  • Safety Compliance: CCC / Rohs
  • High price-effective, reliability with industry standards
  • Built-in over voltage, over current and short circuit protection
  • Working Temperature: 0~40C
  • Storage Temperature: -20~60C
  • Ambient Humidity: 0~95% Non-Condensation