XC809M 1~6 Axis USB CNC Control System Motion Controller FANUC G-code Support Offline Milling Boring Tapping Drilling Feeding
Comparison of XC709D, XC709M, XC809D, XC809M:
Model |
XC709D |
XC809D |
XC709M |
XC809M |
Application Field |
Used in engraving machines, engraving and milling machines, small machining centers |
Used for drilling, tapping, and automated drilling machines. |
||
Algorithm |
Micro line segments Look-ahead Algorithm |
General algorithm |
||
Workpiece |
Processing standard Workpiece |
Processing non-standard Workpiece |
||
Manual Programming |
Support |
Don’t support |
||
Program exported from Computer |
Support |
Support |
- Based on 32-bit microprocessor, fully linked, 0.001mm interpolation accuracy, maximum speed of 30 m / min, support direction + pulse and quadrature pulse.
- 7-inch color widescreen LCD, resolution 800X480, Windows interface style. Equipped with 8 soft function keys, the operation is simple and easy to learn. Provide rich display interface such as parameter classification, alarm log, system diagnosis, etc., convenient for debugging and maintenance.
- It can run 3 programs (1 main program and 2 sub-programs) at the same time, which is convenient for writing programs for processing, loading and blanking.
- International standard G directive, compatible with FANUC system directives.
- 40 kinds of G-command support drilling cycle and tapping cycle.
- Part program full-screen editing, built-in 512M massive program space, can store N parts program.
- USB interface, support U disk file reading and writing, data backup.
- Input 24 points (expandable to 96), output 24 points (expandable to 96) (custom), flexible and convenient.
- Chinese/English operation interface, switchable, complete help information, and more convenient operation.
- System uses pre-interpolation acceleration and deceleration control.
- Support multi-level operation authority, convenient device management, and limited time system locking function.
- Support GG, Mastercam, PowerMill, FeatureCAM, ArtCAM, JDPaint, Wentai and other third-party software G code files.
- Supports self-programming of the tool magazine and flexible use of multiple tool magazines.
Basic Functions |
|
Number of control axis |
1~6 axis (X, Y, Z, A, B, C) |
Number of linkage axis |
full linkage |
Tool magazine |
Support, need to edit the magazine code |
Spindle |
2 analog spindles, where the spindle 1 can use a digital spindle (occupying a digital axis) |
Spindle monitoring |
Yes |
Minimum command unit |
0.001 mm |
Maximum command value |
±99999999 × minimum command unit |
Rapid feed rate |
30000 mm / min |
Rapid feedrate override |
F0, 25%, 50%, 75%, 100% |
Pulse mode |
1: direction + pulse 2: quadrature pulse (if the driver supports, recommended, anti-interference is stronger) |
Maximum frequency |
100 KHz, 200 KHz, 500 KHz can be set. (500 KHz can only be realized in all axes orthogonal output mode) |
Feed rate override |
0~150% |
Electronic gear ratio |
1 ~ 65535: 1 ~ 65535 |
Automatic acceleration and deceleration |
Yes |
Positioning |
G00 (linear interpolation positioning) |
Interpolation |
straight line (G01), arc (G02/G03/G12), helical interpolation |
Return to reference point |
Automatically return to reference point (G28) |
LCD |
7-inch TFT LCD screen with resolution of 800×480 |
MDI software key |
8 |
Single step to |
x1, x10, x100 |
Communication interface |
U disk interface |
External hand wheel interface |
Yes |
I/O interface |
24/24 (expandable to 96/96) |
Pause (seconds) |
Yes |
Quasi-stop state |
Yes |
Quasi-stop |
Yes |
Storage trip check |
Yes |
MDI operation |
Yes, support multi-segment operation |
Reset |
Yes |
Jump switch |
Yes |
Single-segment operation |
Yes |
Program protection switch |
Yes |
Self-diagnostic function |
Yes |
Emergency stop |
Yes |
Power |
Single Phase Input 100~240V AC 1.52A 50/60 Hz±1, Output 24V DC 3.2A |
Coordinate system |
Machine coordinate system (G53), workpiece coordinate system (G92, G54~G59), local coordinate system (G52), coordinate system plane designation |
Automatic coordinate system setting |
Yes |
Decimal point input |
Yes |
Auxiliary Function |
|
Auxiliary function |
M2 digits, M code customization, manual / MDI / automatic mode control spindle forward rotation, reverse rotation, stop; control coolant start and stop; control lubrication start and stop, etc. |
Spindle Function |
|
Spindle function |
double spindles |
Digital spindle |
Supported by spindle 1, occupies one digital axis (Z axis does not support), and the rotation speed is more stable. |
Tapping |
Support |
Spindle analog output |
Yes, dual spindles |
Knife Function |
|
Tool function |
Support automatic tool change, support split centering knife, 3-point centering tool |
Tool compensation memory |
-9999.999~9999.999, 99 |
Tool compensation |
Length compensation for each axis |
Editing Operation |
|
Editing functions |
parameters, diagnostic bitwise input, program editing, MDI multi-block execution |
Storage capacity |
512M |
Number of stored programs |
N one |
Display of program name |
Chinese, English, numbers, combination |
Program line lookup |
Yes |
Skip the optional block |
Yes |
Program switch |
Yes |
Display |
|
Display |
Chinese, English, Switchable |
Processing time, number of parts display |
Yes |
Spindle speed, M/S command |
Yes |
Dimensions (mm) |
Dimensions (height × width × thickness) 390×253×80 |
Opening size (height x width) |
370×228 |